Description
Aquaflex Roof Plus is a ready-to-use liquid waterproofing membrane formulated by MAPEI's R&D laboratories, which have developed an innovative system composed of synthetic polyurethane-acrylic resins in aqueous dispersion, without solvents or volatile organic substances ( VOC). Once dry, Aquaflex Roof Plus creates a continuous membrane, with an elongation capacity of more than 350%, resistant to atmospheric agents and ultraviolet rays, thus guaranteeing long-lasting protection to the support.
FEATURES
- increased elasticity compared to common acrylic waterproofing membranes
- Fast drying
- Ready to use, easy to apply thanks to its special consistency and high tensile strength.
IMPORTANT WARNINGS
- Do not apply Aquaflex Roof Plus at temperatures below +5°C or above +35°C, or if rain is imminent.
- For roofs subjected to severe temperatures, always apply Mapetex 50 reinforcement.
- Do not apply if there is dew on the substrate. Protect from rain until completely dry.
- Do not apply Aquaflex Roof Plus on surfaces with residual humidity > 2.5% or subject to rising damp.
- Do not apply Aquaflex Roof Plus to painted metal substrates.
- In the event of rain between two layers of Aquaflex Roof Plus, wait at least 12 hours before applying the second layer or, in any case, until there is no more residual humidity, in order to do not affect the adhesion between the two layers.
- Do not use on recently applied bituminous sheets (< 6 months); in all cases, wait until the surfaces to be treated are completely oxidized.
APPLICATION AREAS
Waterproofing of:
- Flat, sloping, curved or complex shaped roofs.
- New roofs and repair of existing roofs
Aquaflex Roof Plus can be applied to:
- Concrete
- Cement screeds or screeds based on special binders (Topcem or Topcem Pronto)
- Ceramic and stone cladding
- Fiber cement slabs
- Existing bituminous sheets
- Galvanized sheet, copper, aluminum, steel or iron.
CONSUMPTION
- The consumption indicated corresponds, in general, to the application of a uniform film on a flat surface and could increase if the surface of the substrate is irregular.
- As a protective finish or reflective coating on existing bituminous membranes: approximately 0.9 kg/m².
- As a waterproofing membrane: 2 kg/m² corresponds to approximately 1 mm dry thickness.
COLOR
- White, gray or terracotta red
PRESENTATION
- 5 kg and 20 kg drums
