Description
One-component polyurethane adhesive foam that cures with ambient humidity, with strong adhesion to most materials and substrates used in construction. A considerable time saving in terms of preparation and application compared to other traditional systems.
FEATURES
.- Its formulation based on polyurethane foam gives it great adhesion to most materials used in construction and DIY, with the exception of non-stick materials such as PE, PP and PTFE.
- It does not require any reagents or additives.
- It does not require additional chemical reagents, only the humidity it takes from the environment and from the substrate during the first minute of aeration. Depending on this humidity, the product polymerizes, forming a first layer (skin) in approximately 5 minutes.
- No additional containers, mixing tools, water or other items used in traditional methods are needed for application. Simply screw the bottle onto the applicator gun...and off you go.
- Fischer foam applicator guns allow the product to be correctly dosed thanks to the combination of the trigger and the regulating screw, which means that a foam can achieve a high output.
- As its formulation is solvent-free, it can be used without problem to glue insulating panels or moldings made of delicate materials, such as expanded polystyrene.
- Grey color
APPS
. It is suitable for all types of assembly and repair work with materials such as wood, plaster, drywall, plasterboard, metal, ceramics, precast concrete, cement, etc. Not suitable for PE, PP or Teflon. Not recommended for permanent contact with water. Recommended for indoor use.
Construction materials
.
Drink Gypsum Porexpan Porexpan Plaster Plasterboard Metal Ceramic Prefabricated concrete Cement Ceramic Ceramic. Cement
FUNCTIONALITY
FUNCTIONALITY
.
- Apply the product in a bead or dot pattern to one side of the materials to be joined.
- Join the two sides by pressing them firmly together for a few seconds.
- For heavy materials, it is recommended to use mechanical tightening until the product is completely dry.
- The surfaces to be glued must be firm and completely clean. At least one of the surfaces must be porous.
